Need help? Text us.
Sniper Fuel Injection System Kit 550-872K; Stealth 4150 650 HP Throttle Body 870 CFM Classic Gold Aluminum
$1,809.95
This item ships free with qualifying orders of $150 or more.
See our shipping policy for more details.
Details
- Bolt on 4150 flange carburetor replacement fit’s a wide range of factory intake manifolds
- Throttle body mounted ECU - no extra boxes to mount
- Supports up to 650HP with four 100lb/hr injectors or 1250HP with eight 100lb/hr injectors
- All of the wiring exits below the rear fuel injector cover, for a completely stealth installation.
- Timed spark part for vacuum advanced distributors located under the front fuel bowl, for easy access to the distributor.
- Air entry is machined to fit most stock style air cleaners with air cleaner locator provisions
- Only 4 wiring connections required! (Battery +, battery - , switched ignition & RPM)
- Requires use of external fuel pressure regulator, Holley PN# 12-886 or equivalent, set to a base pressure of 58.5 PSI
- Integrated ignition timing control improves idle stability, drive-ability, and wide open throttle response
- High resolution full color touchscreen for initial setup, tuning, and gauge displays
- Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!) - NO laptop required!
- Self-tuning ECU means you don’t have to be a computer/tuning wiz to have EFI!
- The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides realtime fuel map learn!
- OEM style TPS/IAC and fuel pressure regulator, for years of dependable service
- Included clamp-on oxygen sensor kit for 2.25" exhaust ensures a leak free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
- Also available in Black, PN# 550-871 and Shiny, PN# 550-870 finishes
- Timed spark part for vacuum advanced distributors located under the front fuel bowl, for easy access to the distributor.
- Air entry is machined to fit most stock style air cleaners with air cleaner locator provisions
- Only 4 wiring connections required! (Battery +, battery - , switched ignition & RPM)
- Requires use of external fuel pressure regulator, Holley PN# 12-886 or equivalent, set to a base pressure of 58.5 PSI
- Integrated ignition timing control improves idle stability, drive-ability, and wide open throttle response
- High resolution full color touchscreen for initial setup, tuning, and gauge displays
- Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!) - NO laptop required!
- Self-tuning ECU means you don’t have to be a computer/tuning wiz to have EFI!
- The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides realtime fuel map learn!
- OEM style TPS/IAC and fuel pressure regulator, for years of dependable service
- Included clamp-on oxygen sensor kit for 2.25" exhaust ensures a leak free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
- Also available in Black, PN# 550-871 and Shiny, PN# 550-870 finishes
Specifications
- Fuel Injection System Kit Series:
- Stealth 4150
- Injection Style:
- Throttle Body
- Supported Horsepower:
- 650 HP
- Includes Intake Manifold:
- No
- Includes Throttle Body:
- Yes
- Throttle Body Mounting Flange:
- 4150 Square Bore
- Throttle Body CFM:
- 870 CFM
- Throttle Body Material:
- Aluminum
- Throttle Body Finish:
- Classic Gold
- Includes Fuel Rails:
- No
- Number of Injectors Included:
- 4 Injector
- Injector Flow Rate:
- 100 lbs/hr.
- Includes Hand-Held Calibration Module:
- Yes
- Includes ECM:
- Yes
- Includes Fuel Pump:
- Yes
- Includes Fuel Pressure Regulator:
- Yes
- Sensors Included:
- O2, MAP, TPS
- Quantity:
- Sold As Each